In any building or structure there is a ventilation system that is responsible for the exhaust in the room. The pipe facing the street usually ends with some solution: either a traditional fixed ventilation poles,or a wind-driven ventilation turbine. A ventilation turbine solves this problem much more efficiently than conventional ventilation turbines, without using electricity for this purpose. Practice has shown that ventilation turbines made of metal, in addition to the obvious advantages, have a lot of disadvantages, which is why consumers choose traditional solutions.
× Disadvantages of metal Turbine Vent ×
× Performance ×
Tests conducted at Kazan technical University named after Tupolev it was shown that the performance of a metal venitlation turbine is 35% lower than that of a nanodefector. The start speed of the turbine is also higher. This means that at a comparable price, the amount of time the metal turbine will run and the operating time will be significantly less.
Х
Название товара
Подробное описание продукта.
Здесь вы можете расписать:
Подробное описание продукта.
Здесь вы можете расписать:
- свойства товара,
- параметры товара,
- описание товара,
- наличие на складе,
- цвет,
- количество.
Напишите их тут. И будет у вас не просто сайт, а интернет-магазин.
× Oxidation of parts ×
Any metal is subject to oxidation. Bolts, the turbine itself, rivets, rod and bearings are made of different metals that interact with each other. The open design of the product, lack of protection from moisture and cheap materials lead to rapid oxidation of parts. This makes it difficult to rotate the product and leads to jammed bearings, which are often impossible to change without breaking the seat.
Х
Название товара
Подробное описание продукта.
Здесь вы можете расписать:
Подробное описание продукта.
Здесь вы можете расписать:
- свойства товара,
- параметры товара,
- описание товара,
- наличие на складе,
- цвет,
- количество.
Напишите их тут. И будет у вас не просто сайт, а интернет-магазин.
× Imbalance ×
Due to manual production, all turbo vent do not rotate smoothly from the very beginning. Over time, the imbalance only gets bigger. This can lead to unpleasant noise during operation, rapid bearing wear, deformation, and complete stop of the product. Sometimes it takes only a few months of deflector operation.
Х
Название товара
Подробное описание продукта.
Здесь вы можете расписать:
Подробное описание продукта.
Здесь вы можете расписать:
- свойства товара,
- параметры товара,
- описание товара,
- наличие на складе,
- цвет,
- количество.
Напишите их тут. И будет у вас не просто сайт, а интернет-магазин.
× It is easy to damage ×
In the production of ventilation turbine, very thin metal is used, which is easy to dent when falling, transporting and installing the turbine. It is the thin metal, along with unbalancing and heavy weight, that causes the turbine to deform and stop further when it rotates after some time.
Х
Название товара
Подробное описание продукта.
Здесь вы можете расписать:
Подробное описание продукта.
Здесь вы можете расписать:
- свойства товара,
- параметры товара,
- описание товара,
- наличие на складе,
- цвет,
- количество.
Напишите их тут. И будет у вас не просто сайт, а интернет-магазин.
X
Спасибо за заявку!
Заявка отправлена. Наш менеджер свяжется с Вами в ближайшее время.
✔
All these shortcomings inspired us to create a nano deflectors,
which is devoid of these problems.
The engineers of our company have been manufacturing metal ventilation turbine for several years and are familiar with their shortcomings, including due to feedback from customers who installed these ventilation turbine and who later wrote to us about their particular problem. We took into account all the imperfections in the manufacture and operation of metal ventilation turbine and designed a new generation turbine where there are no such drawbacks.
It's a nano deflector.
We found a unique solution and patented it
Thus, we were able to achieve:
✓High quality and strength
We chose a different material-high-quality ABS plastic, which is not afraid of frost, moisture, heat, sun, while it is very light and durable. Our production is fully automated, all parts are of the same quality, perfectly symmetrical, which when assembling any finished turbine allows you to ensure absolutely equal characteristics and equally stable operation. We have achieved structural strength due to numerous stiffening ribs and well-thought-out fasteners.
✓ High performance
Tests conducted at Kazan technical University named after Tupolev
it was shown that the performance of the nano deflector is 35% higher than the performance of a metal ventilation turbine (at a wind speed of 3 meters per second ). The start speed of the turbine is also higher. This means that the exhaust system will work better and is able to work on a larger area.
✓Quiet operation
The nano deflector uses high-quality plastic and there is no unbalance when the turbine rotates, respectively, and there is no noise, which contributes to a comfortable rest at home and normal work in the office. Over time, the imbalance will also not appear, which guarantees your peace of mind throughout the entire life of the product!
✓Durability of the structure
The nanodefector is light and balanced throughout operation, which means that the pressure on the bearings is much less, so the service life is much longer . The light weight of the nano deflector is not
loosens the pipe, the pendulum effect is absent.
X
Спасибо за заявку!
Заявка отправлена. Наш менеджер свяжется с Вами в ближайшее время.
We control every batch and are responsible for quality
We have developed a completely new product, which currently has no analogues in Russia or in the world. Our solution is patented and we are really responsible for the quality of our products, using only high-quality materials.
We have improved turbine performance, improved impact resistance, removed noise during operation, installed expensive high-quality bearings and made maintenance of the deflector easy and understandable.
We have already sold several thousand turbines and received only positive reviews.
X
Спасибо за заявку!
Заявка отправлена. Наш менеджер свяжется с Вами в ближайшее время.
How to find us
Adress: 428000, Russian Federation,
Cheboksary city, Tekstilshchikov street, 10, office 3
E-mail: nanodeflector@mail.ru
Contact person: Alexei Filippov
We're located at:
428000, Russian Federation, Cheboksary city,
Tekstilshchikov street, 10, office 3.
Contact person: Alexei Filippov
8(800) 555 20 12
nanodeflector@mail.ru